Buyer Follow-Up Cadence: A Wholesale Schedule That Gets Replies

Buyer Follow-Up Cadence: A Wholesale Schedule That Gets Replies
Buyer Follow-Up Cadence: A Wholesale Schedule That Gets Replies

Table of Contents

Table of Contents
Table of Contents

A buyer follow-up cadence is a planned sequence of touches (emails, calls, LinkedIn messages, samples) with set gaps between them and a defined end. For a consumer brand selling to retail buyers, a workable default is four to six touches over four to six weeks. The first follow-up comes about a week after the introduction. Each touch adds something new, and the sequence stops with a clear closing note. This guide gives the schedule, the reasoning behind it and the points where brands most often lose a buyer.

KingpinBuild Retail Buyer RelationshipsKingpin helps consumer brands connect with relevant global retailers by finding retailers that fit and reaching buyers in their language, without relying on traditional trade shows.Visit

TL;DR

  • Retail buyers move slowly and receive many pitches, so space touches days apart, not hours. A first follow-up at about day 5 to 7 is a sound default.

  • Four to six touches over four to six weeks is enough for a cold introduction. After a meeting or trade show, a faster one-week window applies.

  • Every touch needs a new reason to write: a sample, a sell-through number, a line-sheet update, or an answer to something the buyer said.

  • Use two or three channels, not one. End with a closing note, then pause and return next season with news.

  • Track replies by touch number. That tells you where your sequence works and where it only adds noise.

Table of Contents

  • Why retail buyers need a different cadence than a typical sales lead

  • The core design: timing, touches, channels, stop rule

  • A day-by-day example for a cold introduction

  • Follow-up after a meeting, a sample or a trade show

  • Making every touch earn its place

  • Adjusting the cadence to buyer intent

  • Measuring the cadence

  • What goes wrong most often

  • Where Kingpin fits

  • Our perspective

  • FAQ

  • Sources

Why retail buyers need a different cadence than a typical sales lead

Most cadence advice is written for software sales: a rep, a short buying cycle, a decision maker who can say yes on a call. Wholesale works differently. A retail buyer manages a category, sits through line reviews, and can only add new products at certain points in the calendar. A “no reply” often means “not now,” not “no.”

That changes three things about your cadence:

  1. The gaps are longer. Daily touches read as pressure. Gaps of several days to a week respect the buyer’s workload.

  2. The sequence is shorter. Buyers talk to each other, and a brand that keeps pushing gets remembered for the wrong reason.

  3. The content carries more weight than the count. A buyer will answer one message that fits their category and shelf. They will ignore ten that do not.

We cover why context decides whether outreach gets read in why most wholesale outreach gets ignored. The cadence below assumes your first message already passes that test: right retailer, right category, a clear reason to talk.

The core design: timing, touches, channels, stop rule

Every good cadence answers four questions. Settle them before you write a single message.

How many touches

For a cold introduction to a retail buyer, plan on four to six touches in total, including the first email. More than that rarely adds replies and starts to cost you goodwill. Warm contacts, such as someone you met at a show or who replied once and went quiet, can take a shorter, tighter sequence of three to five touches because they already know who you are.

The first follow-up matters most. In our experience building outreach for brands, the first nudge after the introduction is where most late replies come from, so make it count and do not treat it as a formality.

How far apart

A schedule we recommend as a starting point for a cold introduction, measured in business days:

Touch

Timing

Channel

What it adds

1. Introduction

Day 0

Email

Who you are, why this retailer, one proof point

2. First follow-up

Day 5 to 7

Email

One relevant detail: a sell-through figure, a new placement, a line-sheet page

3. Second channel

Day 10 to 12

LinkedIn or phone

A short note referencing the email, not a repeat of it

4. Value touch

Day 17 to 21

Email

A sample offer, a seasonal fit, or news from a similar retailer

5. Closing note

Day 28 to 35

Email

A polite last message that leaves the door open

6. Pause

After day 35

None

Return next season with something new

The gaps widen as the sequence goes on. Early touches can be closer because the first impression is still fresh. Later ones need more room.

Which channels

Email should carry most of the sequence because it is easy for a buyer to forward, file and answer when time allows. Add a second channel partway through. Senior buyers and category heads often spend more time on LinkedIn or the phone than in a crowded inbox, so a brief LinkedIn message or a call at touch three can reach people the first two emails missed. If you are weighing how to space channels in a prospecting sequence, this LinkedIn outreach case study shows one approach to using LinkedIn as part of outreach.

If you are emailing buyers in other regions, check the local rules on business email before you automate anything. Our guide on whether B2B cold email is legal walks through the differences by region.

When to stop

Decide the stop rule in advance, so it is not an emotional call at touch five. A simple rule: after the closing note, the contact moves to a nurture list and gets one relevant update per season. If the buyer replies at any point with a clear no, the sequence ends the same day. If they reply with “not now,” ask when the next review window opens and put that date in your CRM.

A day-by-day example for a cold introduction

Here is the sequence in practice for a better-for-you snack brand introducing itself to a regional grocery buyer. The details are illustrative, not a client result.

Day 0, introduction. Three short paragraphs: the retailer’s shopper and why your product fits a gap in their category, one concrete proof point (velocity in comparable doors, or a distributor placement), and a single ask: a 15-minute call or permission to send samples. Our retailer introduction scripts show the structure for both email and phone.

Day 6, first follow-up. Do not write “just checking in.” Reply on the same thread with one new detail: the price per unit and suggested retail price, or a one-line note that the product is now in a neighboring chain’s test stores. Repeat the ask.

Day 11, second channel. A LinkedIn connection note or a short call to the buyer’s line. Keep it to two sentences: who you are, that you emailed about a specific category fit, and that you will make it easy by sending a one-page sheet.

Day 19, value touch. Offer samples with a specific reason: a seasonal flavor, an upcoming set review, or a gap you noticed in their shelf. Samples work best when they arrive with a one-page line sheet and a clear next step.

Day 32, closing note. Two sentences. Say you will stop here, that you are glad to reconnect when the category next reviews, and that you can send the line sheet whenever useful. Closing notes are often read, because they remove pressure.

Then the contact goes into your nurture list with a note about the next likely buying window.

Follow-up after a meeting, a sample or a trade show

A warm cadence runs faster and rests on what was said. Three common triggers:

After a meeting or call. Send a thank-you email the same day or the next morning with a recap of what you agreed, the next step and who owns it. Add a light check-in two to three weeks later if the next step has not moved.

After sending samples. Confirm receipt one to two business days after delivery. Once the buyer confirms, wait about a week before asking one review question, such as which items fit their shelf and whether pricing works.

After a trade show. Buyers interviewed by Lunr Capital said a one-week follow-up window felt right after a show, and that the person who met the buyer should send the message. Speed matters here, but a rushed generic blast does not help. The buyers also said they want the follow-up to reflect what was discussed, such as pricing, packaging or a product idea. One Target buyer put it this way: “If I gave you feedback, reflect it back—show me you understood it.”

If trade show costs are the problem you are trying to solve, the same cadence works without the booth. A well-targeted introduction followed by this sequence reaches buyers directly, which is what our wholesale outreach guide covers in more depth.

Making every touch earn its place

The most common cadence failure is not timing. It is repetition. Four emails that say the same thing are one email sent four times.

Use this test on each message: if the buyer read only this one, would it give them a reason to reply? Good reasons to write include:

  • A reference to the earlier exchange. The topic discussed, the question asked, or the objection raised. This outweighs personalization based only on the buyer’s name or title.

  • A relevant number. Sell-through in comparable doors, repeat rate, or a price point against the category average.

  • A concrete offer. Samples, an introductory promotion, or a pilot in a small set of stores.

  • A fit with the calendar. Seasonal items, upcoming resets, or the next line review.

  • A lower-friction ask. Move from “Can we schedule a call?” to “Can I send a one-page sheet?”

Buyers also notice how you handle feedback. In the Lunr Capital interviews, retail buyers described a brand that cannot engage with comments on pricing or packaging as a red flag. If a buyer gives you a reason, answer it in the next touch.

For more on lifting replies at each step, see our guide on increasing your buyer response rate.

Adjusting the cadence to buyer intent

A fixed calendar is a starting point. Real buyers behave differently, and your cadence should branch.

Buyer signal

What to do

Opens or clicks but does not reply

Keep the schedule and make the next ask smaller

Replies “send more info”

Send the line sheet within one business day and ask for a short call in the same message

Replies “not now” or “check back in spring”

Stop the sequence, log the date and re-engage two to three weeks before the window

Passes you to a colleague

Thank the buyer, restart a warm sequence with the new contact and mention the referral

Asks for samples

Switch to the sample track: confirm receipt, then one review question

Clear no

End the sequence the same day

Promises set the timing too. If you told a buyer you would send pricing on Thursday, the clock starts there, not on day 7 of your template.

This is also why pipeline hygiene matters. A cadence only works if every contact has a status, a next date and a note on what was last said. Our guides on retailer database management and wholesale pipeline automation cover how to keep that record without losing the personal touch.

Measuring the cadence

Once you have sent the sequence to a few dozen retailers, look at the numbers by touch, not just overall:

  • Reply rate by touch number. If most replies arrive at touch two, strengthen touch two and consider shortening the rest.

  • Positive replies versus total replies. A sequence that earns more refusals than interest at later touches is too long.

  • Time from first touch to first call. This shows whether your gaps are right.

  • Calls to samples to orders. The cadence is only one stage. Follow the buyer through to the first purchase order.

Change one variable at a time: the gap, the subject line or the proof point. Changing three at once tells you nothing. Our wholesale pipeline metrics guide lists what to track at each stage.

The broader set of sequence designs, including shorter and longer variants, is in sales sequences: five cadences and when to use them.

What goes wrong most often

Sending touches too fast. Daily emails to a buyer you have never spoken with come across as pressure and can get your domain flagged.

Treating silence as rejection. Many buyers answer only when a category window opens. Keep a light seasonal touch going after the main sequence ends.

Skipping the second channel. Some buyers rarely answer email but pick up a call or respond on LinkedIn. A sequence confined to one channel misses them.

Forgetting who owns the follow-up. When several people at your company talk to the same retailer, the buyer gets mixed messages. One owner per account solves it.

Running the sequence by hand. A spreadsheet works for ten retailers. At fifty or more, missed follow-ups are the usual result. This is where most small teams fall behind, and it is a large part of why brands bring in help.

Where Kingpin fits

A cadence is simple to design and hard to keep up. Every retailer needs the right buyer, a message built around their category, the follow-ups sent on the right day, and a record of every reply. Kingpin is an AI-powered wholesale team for consumer brands. We find retailers that fit the brand, reach their buyers in their language, follow up on replies and hand interested buyers to the brand. We keep existing accounts warm and follow up on reorders all year. Kingpin has $700M+ in wholesale GMV since 2021 and 3,500+ retailers on Kingpin.

The commission is 0%, and you keep full ownership of your retail relationships and sales. Every plan has one monthly fee, set on the strategy call. You can learn more on kingpin.ai.

If you want help with follow-up, start with a strategy call.

Our perspective

We built Kingpin around one idea: a brand should own its retail relationships. That is why we charge no commission, and it is why we think about cadence the way we do.

A follow-up schedule is not a trick for getting around a buyer’s inbox. It is a way of staying useful while the buyer does their own work. When a brand shows up with a relevant detail at the right moment, the buyer sees a brand that understands their category. When it shows up with the same ask four times, the buyer sees a brand that does not.

That is why we pair research with a personal touch. Our research agent finds the retailers that fit a brand in every market, with the reason for each one. The personal touch is the message that follows: specific, short and written for that buyer. The cadence connects the two.

Most of the brands we meet are not short on products. They are short on hours. Founders and small commercial teams are expected to run outreach, answer samples, update catalogs and keep a CRM current, all while running the business. We take outreach and follow-ups on, with our account manager reviewing every list and message.

Vlad

FAQ

What does follow-up cadence mean?

It is the planned pattern of your follow-up messages: how many you send, how many days apart, on which channels, and when you stop. For retail buyers, it keeps your brand in front of a busy buyer without becoming background noise.

How many times should I follow up with a retail buyer?

For a cold introduction, plan on four to six touches over four to six weeks, ending with a closing note. After a meeting or trade show, a shorter run of three to five touches is usually enough. Stop earlier if the buyer says no.

What is the 3-3-3 rule in sales?

There are several versions. One common form is three attempts across three channels within about three weeks. Another is three new prospects and three existing leads a day. For buyer follow-up, the first version is a reasonable minimum, though a wholesale sequence often runs a little longer because buyers review on a seasonal calendar.

Should I follow up by email, phone or LinkedIn?

Use all three, in that order of weight. Email carries the sequence, and a call or LinkedIn message at touch three reaches buyers who are less active in their inbox. Keep each message short and refer back to the earlier one.

What should I do if a buyer never replies?

Send the closing note, then move them to a nurture list. Return once a season with something new, such as a new product, a placement win or a seasonal item, instead of repeating the original pitch.

Sources

A buyer follow-up cadence is a planned sequence of touches (emails, calls, LinkedIn messages, samples) with set gaps between them and a defined end. For a consumer brand selling to retail buyers, a workable default is four to six touches over four to six weeks. The first follow-up comes about a week after the introduction. Each touch adds something new, and the sequence stops with a clear closing note. This guide gives the schedule, the reasoning behind it and the points where brands most often lose a buyer.

KingpinBuild Retail Buyer RelationshipsKingpin helps consumer brands connect with relevant global retailers by finding retailers that fit and reaching buyers in their language, without relying on traditional trade shows.Visit

TL;DR

  • Retail buyers move slowly and receive many pitches, so space touches days apart, not hours. A first follow-up at about day 5 to 7 is a sound default.

  • Four to six touches over four to six weeks is enough for a cold introduction. After a meeting or trade show, a faster one-week window applies.

  • Every touch needs a new reason to write: a sample, a sell-through number, a line-sheet update, or an answer to something the buyer said.

  • Use two or three channels, not one. End with a closing note, then pause and return next season with news.

  • Track replies by touch number. That tells you where your sequence works and where it only adds noise.

Table of Contents

  • Why retail buyers need a different cadence than a typical sales lead

  • The core design: timing, touches, channels, stop rule

  • A day-by-day example for a cold introduction

  • Follow-up after a meeting, a sample or a trade show

  • Making every touch earn its place

  • Adjusting the cadence to buyer intent

  • Measuring the cadence

  • What goes wrong most often

  • Where Kingpin fits

  • Our perspective

  • FAQ

  • Sources

Why retail buyers need a different cadence than a typical sales lead

Most cadence advice is written for software sales: a rep, a short buying cycle, a decision maker who can say yes on a call. Wholesale works differently. A retail buyer manages a category, sits through line reviews, and can only add new products at certain points in the calendar. A “no reply” often means “not now,” not “no.”

That changes three things about your cadence:

  1. The gaps are longer. Daily touches read as pressure. Gaps of several days to a week respect the buyer’s workload.

  2. The sequence is shorter. Buyers talk to each other, and a brand that keeps pushing gets remembered for the wrong reason.

  3. The content carries more weight than the count. A buyer will answer one message that fits their category and shelf. They will ignore ten that do not.

We cover why context decides whether outreach gets read in why most wholesale outreach gets ignored. The cadence below assumes your first message already passes that test: right retailer, right category, a clear reason to talk.

The core design: timing, touches, channels, stop rule

Every good cadence answers four questions. Settle them before you write a single message.

How many touches

For a cold introduction to a retail buyer, plan on four to six touches in total, including the first email. More than that rarely adds replies and starts to cost you goodwill. Warm contacts, such as someone you met at a show or who replied once and went quiet, can take a shorter, tighter sequence of three to five touches because they already know who you are.

The first follow-up matters most. In our experience building outreach for brands, the first nudge after the introduction is where most late replies come from, so make it count and do not treat it as a formality.

How far apart

A schedule we recommend as a starting point for a cold introduction, measured in business days:

Touch

Timing

Channel

What it adds

1. Introduction

Day 0

Email

Who you are, why this retailer, one proof point

2. First follow-up

Day 5 to 7

Email

One relevant detail: a sell-through figure, a new placement, a line-sheet page

3. Second channel

Day 10 to 12

LinkedIn or phone

A short note referencing the email, not a repeat of it

4. Value touch

Day 17 to 21

Email

A sample offer, a seasonal fit, or news from a similar retailer

5. Closing note

Day 28 to 35

Email

A polite last message that leaves the door open

6. Pause

After day 35

None

Return next season with something new

The gaps widen as the sequence goes on. Early touches can be closer because the first impression is still fresh. Later ones need more room.

Which channels

Email should carry most of the sequence because it is easy for a buyer to forward, file and answer when time allows. Add a second channel partway through. Senior buyers and category heads often spend more time on LinkedIn or the phone than in a crowded inbox, so a brief LinkedIn message or a call at touch three can reach people the first two emails missed. If you are weighing how to space channels in a prospecting sequence, this LinkedIn outreach case study shows one approach to using LinkedIn as part of outreach.

If you are emailing buyers in other regions, check the local rules on business email before you automate anything. Our guide on whether B2B cold email is legal walks through the differences by region.

When to stop

Decide the stop rule in advance, so it is not an emotional call at touch five. A simple rule: after the closing note, the contact moves to a nurture list and gets one relevant update per season. If the buyer replies at any point with a clear no, the sequence ends the same day. If they reply with “not now,” ask when the next review window opens and put that date in your CRM.

A day-by-day example for a cold introduction

Here is the sequence in practice for a better-for-you snack brand introducing itself to a regional grocery buyer. The details are illustrative, not a client result.

Day 0, introduction. Three short paragraphs: the retailer’s shopper and why your product fits a gap in their category, one concrete proof point (velocity in comparable doors, or a distributor placement), and a single ask: a 15-minute call or permission to send samples. Our retailer introduction scripts show the structure for both email and phone.

Day 6, first follow-up. Do not write “just checking in.” Reply on the same thread with one new detail: the price per unit and suggested retail price, or a one-line note that the product is now in a neighboring chain’s test stores. Repeat the ask.

Day 11, second channel. A LinkedIn connection note or a short call to the buyer’s line. Keep it to two sentences: who you are, that you emailed about a specific category fit, and that you will make it easy by sending a one-page sheet.

Day 19, value touch. Offer samples with a specific reason: a seasonal flavor, an upcoming set review, or a gap you noticed in their shelf. Samples work best when they arrive with a one-page line sheet and a clear next step.

Day 32, closing note. Two sentences. Say you will stop here, that you are glad to reconnect when the category next reviews, and that you can send the line sheet whenever useful. Closing notes are often read, because they remove pressure.

Then the contact goes into your nurture list with a note about the next likely buying window.

Follow-up after a meeting, a sample or a trade show

A warm cadence runs faster and rests on what was said. Three common triggers:

After a meeting or call. Send a thank-you email the same day or the next morning with a recap of what you agreed, the next step and who owns it. Add a light check-in two to three weeks later if the next step has not moved.

After sending samples. Confirm receipt one to two business days after delivery. Once the buyer confirms, wait about a week before asking one review question, such as which items fit their shelf and whether pricing works.

After a trade show. Buyers interviewed by Lunr Capital said a one-week follow-up window felt right after a show, and that the person who met the buyer should send the message. Speed matters here, but a rushed generic blast does not help. The buyers also said they want the follow-up to reflect what was discussed, such as pricing, packaging or a product idea. One Target buyer put it this way: “If I gave you feedback, reflect it back—show me you understood it.”

If trade show costs are the problem you are trying to solve, the same cadence works without the booth. A well-targeted introduction followed by this sequence reaches buyers directly, which is what our wholesale outreach guide covers in more depth.

Making every touch earn its place

The most common cadence failure is not timing. It is repetition. Four emails that say the same thing are one email sent four times.

Use this test on each message: if the buyer read only this one, would it give them a reason to reply? Good reasons to write include:

  • A reference to the earlier exchange. The topic discussed, the question asked, or the objection raised. This outweighs personalization based only on the buyer’s name or title.

  • A relevant number. Sell-through in comparable doors, repeat rate, or a price point against the category average.

  • A concrete offer. Samples, an introductory promotion, or a pilot in a small set of stores.

  • A fit with the calendar. Seasonal items, upcoming resets, or the next line review.

  • A lower-friction ask. Move from “Can we schedule a call?” to “Can I send a one-page sheet?”

Buyers also notice how you handle feedback. In the Lunr Capital interviews, retail buyers described a brand that cannot engage with comments on pricing or packaging as a red flag. If a buyer gives you a reason, answer it in the next touch.

For more on lifting replies at each step, see our guide on increasing your buyer response rate.

Adjusting the cadence to buyer intent

A fixed calendar is a starting point. Real buyers behave differently, and your cadence should branch.

Buyer signal

What to do

Opens or clicks but does not reply

Keep the schedule and make the next ask smaller

Replies “send more info”

Send the line sheet within one business day and ask for a short call in the same message

Replies “not now” or “check back in spring”

Stop the sequence, log the date and re-engage two to three weeks before the window

Passes you to a colleague

Thank the buyer, restart a warm sequence with the new contact and mention the referral

Asks for samples

Switch to the sample track: confirm receipt, then one review question

Clear no

End the sequence the same day

Promises set the timing too. If you told a buyer you would send pricing on Thursday, the clock starts there, not on day 7 of your template.

This is also why pipeline hygiene matters. A cadence only works if every contact has a status, a next date and a note on what was last said. Our guides on retailer database management and wholesale pipeline automation cover how to keep that record without losing the personal touch.

Measuring the cadence

Once you have sent the sequence to a few dozen retailers, look at the numbers by touch, not just overall:

  • Reply rate by touch number. If most replies arrive at touch two, strengthen touch two and consider shortening the rest.

  • Positive replies versus total replies. A sequence that earns more refusals than interest at later touches is too long.

  • Time from first touch to first call. This shows whether your gaps are right.

  • Calls to samples to orders. The cadence is only one stage. Follow the buyer through to the first purchase order.

Change one variable at a time: the gap, the subject line or the proof point. Changing three at once tells you nothing. Our wholesale pipeline metrics guide lists what to track at each stage.

The broader set of sequence designs, including shorter and longer variants, is in sales sequences: five cadences and when to use them.

What goes wrong most often

Sending touches too fast. Daily emails to a buyer you have never spoken with come across as pressure and can get your domain flagged.

Treating silence as rejection. Many buyers answer only when a category window opens. Keep a light seasonal touch going after the main sequence ends.

Skipping the second channel. Some buyers rarely answer email but pick up a call or respond on LinkedIn. A sequence confined to one channel misses them.

Forgetting who owns the follow-up. When several people at your company talk to the same retailer, the buyer gets mixed messages. One owner per account solves it.

Running the sequence by hand. A spreadsheet works for ten retailers. At fifty or more, missed follow-ups are the usual result. This is where most small teams fall behind, and it is a large part of why brands bring in help.

Where Kingpin fits

A cadence is simple to design and hard to keep up. Every retailer needs the right buyer, a message built around their category, the follow-ups sent on the right day, and a record of every reply. Kingpin is an AI-powered wholesale team for consumer brands. We find retailers that fit the brand, reach their buyers in their language, follow up on replies and hand interested buyers to the brand. We keep existing accounts warm and follow up on reorders all year. Kingpin has $700M+ in wholesale GMV since 2021 and 3,500+ retailers on Kingpin.

The commission is 0%, and you keep full ownership of your retail relationships and sales. Every plan has one monthly fee, set on the strategy call. You can learn more on kingpin.ai.

If you want help with follow-up, start with a strategy call.

Our perspective

We built Kingpin around one idea: a brand should own its retail relationships. That is why we charge no commission, and it is why we think about cadence the way we do.

A follow-up schedule is not a trick for getting around a buyer’s inbox. It is a way of staying useful while the buyer does their own work. When a brand shows up with a relevant detail at the right moment, the buyer sees a brand that understands their category. When it shows up with the same ask four times, the buyer sees a brand that does not.

That is why we pair research with a personal touch. Our research agent finds the retailers that fit a brand in every market, with the reason for each one. The personal touch is the message that follows: specific, short and written for that buyer. The cadence connects the two.

Most of the brands we meet are not short on products. They are short on hours. Founders and small commercial teams are expected to run outreach, answer samples, update catalogs and keep a CRM current, all while running the business. We take outreach and follow-ups on, with our account manager reviewing every list and message.

Vlad

FAQ

What does follow-up cadence mean?

It is the planned pattern of your follow-up messages: how many you send, how many days apart, on which channels, and when you stop. For retail buyers, it keeps your brand in front of a busy buyer without becoming background noise.

How many times should I follow up with a retail buyer?

For a cold introduction, plan on four to six touches over four to six weeks, ending with a closing note. After a meeting or trade show, a shorter run of three to five touches is usually enough. Stop earlier if the buyer says no.

What is the 3-3-3 rule in sales?

There are several versions. One common form is three attempts across three channels within about three weeks. Another is three new prospects and three existing leads a day. For buyer follow-up, the first version is a reasonable minimum, though a wholesale sequence often runs a little longer because buyers review on a seasonal calendar.

Should I follow up by email, phone or LinkedIn?

Use all three, in that order of weight. Email carries the sequence, and a call or LinkedIn message at touch three reaches buyers who are less active in their inbox. Keep each message short and refer back to the earlier one.

What should I do if a buyer never replies?

Send the closing note, then move them to a nurture list. Return once a season with something new, such as a new product, a placement win or a seasonal item, instead of repeating the original pitch.

Sources

About The Author
Ysabella Louise

Ysabella Louise

Hi, I'm Ysabella, PMM at Kingpin. We believe that growing revenue shouldn't be a challenge, it should be a no-brainer. So sales teams can focus less on the struggle and more on the wins. I'm here to make sure that vision comes through in every story we tell, and to share what's working, what's changing, and what you should actually know to sell smarter.

Featured Articles

Featured Articles